Skip to content

HomeServicesSliding Door RepairWeatherstripping

Sliding door repair

Sliding Door Weatherstripping in Orlando, FL

Worn seals around a sliding glass door let in drafts, rain, bugs and humid air. New weatherstripping closes those gaps so the door seals properly again.

The service

What weatherstripping does

The seals that close the gaps around your door.

A sliding door has brush or vinyl seals along its edges where the moving panel meets the frame and the fixed panel. They block air, water and insects while still letting the door slide.

Sun, heat and constant movement wear those seals down. They flatten, crack, shrink or pull out of their channels, and gaps open up around the door.

Weatherstripping replacement means removing the worn seals and fitting new ones of the right type and size, then checking that the door still closes and slides easily.

Common problems

Signs your seals are worn

Any of these means air or water is getting past the door.

Drafts near the door

You can feel air moving around the edges.

Water on the floor

Rain gets in at the sill or the sides.

Visible gaps

Daylight shows between the panel and the frame.

Flattened or torn seals

Brush seals worn flat, vinyl cracked or missing.

Bugs getting in

Insects come in around the closed door.

Rattling in the wind

The panel moves because nothing holds it snug.

Repair solutions

How seal problems get fixed

What a weatherstripping repair usually involves.

Seal replacement

Worn brush or vinyl weatherstripping replaced with a matching profile.

Interlock seals

Seals where the two panels meet renewed to close the center gap.

Door adjustment

Roller height checked so the door closes evenly against the new seals.

Sill check

The sill and track looked over for gaps that let water in.

How it works

Our weatherstripping process

A typical weatherstripping repair follows four steps.

1

Inspect

Check the door, rollers, track, latch and seals.

2

Diagnose

Confirm the cause and explain the options before any work.

3

Repair

Adjust, clean or replace the parts that need it.

4

Test

Make sure the door slides smoothly, closes evenly and locks.

FAQ

Weatherstripping questions

What people ask most about sliding door seals.

Can weatherstripping be replaced without replacing the door?

Yes. Weatherstripping sits in channels on the door and frame, so it can be replaced while the door stays in place.

Why is water coming in under my sliding door?

Common causes are worn seals, a door that sits too low because of worn rollers, or debris blocking the track drainage. An inspection will show which.

Will new seals make my door harder to slide?

Seals of the right size should not make the door noticeably harder to move. The door is checked after fitting to make sure it still slides easily.

How do I know which seals my door needs?

There are many profiles. The existing seals are checked so the replacements match your door.

Related services

Related repairs

Problems that often show up alongside worn seals.

Sliding Glass Door Repair

All sliding door problems.

Roller Replacement

Fix a door that sits too low.

Track Repair

Bent, worn or damaged tracks.

Screen Repair

Torn screens and sticking screen doors.

Drafts or leaks around your door?

Call Orlando Sliding Pros or send a request with a photo of the door.