Skip to content

HomeServicesSliding Door RepairTrack Repair

Sliding door repair

Sliding Door Track Repair in Orlando, FL

A bent, worn or dirty track throws a sliding door off line, so it drags, bumps or comes off altogether. Track repair gives the rollers a smooth, straight path again.

The service

Why the track matters

The rail your door rides on every day.

The bottom track is a narrow raised rail that the door’s rollers ride along. It has to be straight, smooth and clean for the door to move easily.

Tracks get dented by dropped objects, furniture and foot traffic, and they wear down where the rollers run. Sand and debris build up in the channel, and corrosion can roughen the surface.

A damaged track also chews through rollers, so track and roller problems often go together. Fixing the track protects the rest of the door.

Common problems

Signs of a damaged track

These usually point to a problem with the track itself.

Door comes off the track

The panel jumps, lifts or drops out of line.

Bumps at the same spot

The door catches at one point every time.

Grinding noise

A rough or gritty sound as the door moves.

Visible dents or flat spots

The rail looks bent, chipped or flattened.

Debris that won’t clear

Build-up packed into the channel.

Rollers keep wearing out

New rollers fail quickly on a rough track.

Repair solutions

How track problems get fixed

The fix depends on how badly the track is damaged.

Deep cleaning

Packed debris and grit cleared from the channel and rail.

Straightening

Minor dents and bends worked back into line.

Worn rail repair

Where a rail is too worn to straighten, repair options are discussed for that door.

Roller check

Rollers are checked too, since a rough track often damages them.

How it works

Our track repair process

A typical track repair follows four steps.

1

Inspect

Check the door, rollers, track, latch and seals.

2

Diagnose

Confirm the cause and explain the options before any work.

3

Repair

Adjust, clean or replace the parts that need it.

4

Test

Make sure the door slides smoothly, closes evenly and locks.

FAQ

Track repair questions

What people ask most about sliding door tracks.

Can a bent sliding door track be straightened?

Minor dents and bends can usually be straightened. How well that works depends on where the damage is and how deep it goes, which an inspection will show.

What if the track is too damaged to straighten?

If the rail is badly worn, broken or corroded, other repair options are discussed for your specific door before any work is done.

Will cleaning the track fix my door?

If the problem is debris, cleaning can make a big difference. If the door still drags or bumps afterwards, the track or rollers are likely damaged.

Why does my door keep coming off the track?

The most common causes are worn rollers, rollers set at the wrong height, or a bent section of track. Fixing the cause should keep the door on its track.

Related services

Related repairs

Repairs that often go hand in hand with track problems.

Sliding Glass Door Repair

All sliding door problems.

Roller Replacement

New rollers for doors that drag.

Lock & Handle Repair

Latches that won’t catch.

Weatherstripping

Drafts and leaks around the door.

Door coming off the track?

Call Orlando Sliding Pros or send a request with a photo of the track.